Vending machines Australia wide — free program or buy outright
VMVending MachineFree or Buy · Australia

Perth · WA

Drink Vending Machines Perth

We supply and place refrigerated drink vending machines across Perth, including the CBD, West Perth, Osborne Park, Malaga, Canning Vale, Welshpool, Kwinana and Henderson. Qualifying workplaces pay nothing for the machine or the service; sites that prefer to own one can buy refurbished from $1,950 + GST.

Glass-front cold drink vending machine with contactless card reader in an office break room
Cold drink vending for cans, bottles, water, juice and sports drinks.

Perth sites we cover

Perth's dry summer heat drives very high water consumption, particularly on the industrial and resource-servicing sites through Kwinana, Henderson, Welshpool and Canning Vale. Those workplaces frequently run water as more than half of total machine volume, which changes how a machine should be configured — more water columns, fewer confectionery-style soft drink facings.

Perth's distance also makes reliability matter more. Remote monitoring means we know a machine is in trouble before the site rings, which keeps service travel productive rather than reactive.

  • Perth CBD, West Perth and Subiaco office sites
  • Osborne Park, Balcatta and Malaga light industrial
  • Canning Vale, Welshpool and Bibra Lake warehousing
  • Kwinana, Henderson and Rockingham heavy industry

Why cold drink demand spikes in Perth over summer

Cold-drink sales are strongly temperature driven. Once daytime maximums sit above 30°C, a single-zone refrigerated machine in a staffed workplace typically turns over two to three times the volume it does in July, and the peak is concentrated between 10am and 3pm. Sites that run out of water and sports drinks by lunchtime on a hot Thursday are usually not undersized — they are simply on a fortnightly refill cycle built for winter.

We plan for that in Perth by watching live sales data through machine telemetry, lifting water and electrolyte facings before the season starts, and shortening the refill cycle on the sites that need it. If a machine keeps selling out, we add a second unit or move to a larger-capacity model rather than leaving your people queuing at the servo across the road.

What our service actually covers

Whatever the arrangement, the Perth service standard is the same.

  • Refrigerated machines specified for local conditions
  • Cashless payment fitted as standard, coin and note optional
  • Telemetry-driven refills so the machine is not empty when it matters
  • Faults attended and staff refunds handled by us
  • Free relocation or removal on placed machines

Frequently asked questions

Do you place free drink machines in Perth?

Yes, for sites with roughly 30 or more daily users within our service coverage across the Perth metropolitan area.

Can machines be configured mostly for water?

Absolutely, and on many Perth industrial sites that is the right answer. We can dedicate the majority of columns to still and sparkling water and electrolyte lines.

Do you supply machines to regional WA?

We sell and freight machines to regional WA. Free placement depends on whether a site is inside a serviceable run.

What payment types work best on Perth industrial sites?

Cashless is strongly preferred — crews rarely carry coins, and card or phone payment removes the change and jam problems entirely.

Get a drink machine for your Perth site

Send your Perth address, headcount and access hours and we will confirm whether free placement applies, or quote a machine to buy.

Machine sizes, specifications and PDF spec sheets

Every machine type we place free or sell outright, with real heights, widths, depths, weights, selection counts, capacity, power draw and temperature ranges. Measure your space against these figures before you order — 4 current models across 1 category. Most floor-standing machines are 1,830 mm high and need a single-phase 10 amp power point within two metres, plus about 100 mm clearance behind for airflow.

Every model has its own listing page with a large photo, full specs and a one-page PDF spec sheet you can hand to your electrician, builder or facilities manager — browse all 4 machine listings.

New machine supply, spare parts and national technician support come through our affiliation with Vending Specialists. We are affiliated with AVS, so every new machine quoted from this page is a current Australian-supplied model with local parts, manuals and technician support behind it.

Cold drink machines

Glass-front and stack drink machines for cans, PET bottles and water. Sized by shelf count and can capacity.

Cold drink machines — dimensions, capacity, power and temperature specifications
ModelBrandH x W x D (mm)WeightSelectionsCapacityPowerTemperatureSpec sheet
Crane MEDIA 2 BevMax (7 Wide / 9 Wide)Best-in-class capacity per footprint, pick-and-place delivery so bottles are not dropped.Crane Merchandising Systems1850 x 1,015 / 1,180 x 822247 / 333 kg35 – 45 drink selectionsVends 5 shelves of 600 ml bottlesSingle phase 10 ampProgrammable 0°C – 23°CPDF
Crane MEDIA BevMax (7 Wide / 9 Wide)Proven high-volume drink machine, full product visibility behind glass.Crane Merchandising Systems1830 x 990 / 1,194 x 813247 / 347 kg35 / 45 selections280 / 360 unitsSingle phase 10 ampRefrigerated glass frontPDF
Vendo G-Drink DR6Executive / MDB, electronic cooling control, strong energy rating for a chilled drink machine.Vendo (SandenVendo)1830 x 950 x 845295 kg6 per shelf, 5 standard shelves / 7 max, 30 – 42 selections336 x 330 ml cans or 240 x 500 ml PET230 V 50 Hz, 800 W max, 252 Wh/h, Energy Class A+2°C to +10°C, climate class N (+16°C to +32°C)PDF
Vendo V721 stack drink machineHighest can capacity on this list. Bottle-to-can conversion needs no shims. LED lighting optional.Vendo (SandenVendo)1830 x 1,003 x 883299 kg10 selections / 10 columns680 cans or 300 PET bottles≤ 3.9 kWh/day (DOE), 8 amp ratingRefrigerated stack, R-134a or CO2 optionPDF