Vending machines Australia wide — free program or buy outright
VMVending MachineFree or Buy · Australia

Adelaide · SA

Beverage Vending Machine Suppliers Adelaide

As beverage vending machine suppliers to Adelaide we sell refurbished refrigerated drink machines from $1,950 + GST, supply current-model new machines, and place machines free at qualifying workplaces. Coverage runs from the CBD through Mile End, Wingfield, Regency Park, Lonsdale and Elizabeth.

Glass-front cold drink vending machine with contactless card reader in an office break room
Cold drink vending for cans, bottles, water, juice and sports drinks.

Adelaide sites we cover

Adelaide has a strong operator market — small businesses buying one or two machines and running their own routes — alongside conventional workplace placement. We support both, which means we sell machines and parts to operators as readily as we place machines in offices, and we do not treat a two-machine buyer as a nuisance.

Adelaide summers deliver some of the hottest days in the country. Machines here need clean condensers and a refrigeration deck with headroom, otherwise the first 42°C week of the year finds every weak unit in the fleet.

  • Adelaide CBD and North Adelaide offices
  • Mile End, Wingfield and Regency Park industrial
  • Lonsdale, Edwardstown and Elizabeth manufacturing
  • Clubs, gyms, education and health sites across the metro area

Why cold drink demand spikes in Adelaide over summer

Cold-drink sales are strongly temperature driven. Once daytime maximums sit above 30°C, a single-zone refrigerated machine in a staffed workplace typically turns over two to three times the volume it does in July, and the peak is concentrated between 10am and 3pm. Sites that run out of water and sports drinks by lunchtime on a hot Thursday are usually not undersized — they are simply on a fortnightly refill cycle built for winter.

We plan for that in Adelaide by watching live sales data through machine telemetry, lifting water and electrolyte facings before the season starts, and shortening the refill cycle on the sites that need it. If a machine keeps selling out, we add a second unit or move to a larger-capacity model rather than leaving your people queuing at the servo across the road.

What our service actually covers

Whatever the arrangement, the Adelaide service standard is the same.

  • Refrigerated machines specified for local conditions
  • Cashless payment fitted as standard, coin and note optional
  • Telemetry-driven refills so the machine is not empty when it matters
  • Faults attended and staff refunds handled by us
  • Free relocation or removal on placed machines

Frequently asked questions

Do you sell drink machines to Adelaide operators?

Yes. We supply refurbished and new machines, payment systems and spares to independent operators as well as end users.

What does a refurbished drink machine cost delivered to Adelaide?

From $1,950 + GST for the machine, plus payment system and transport quoted on your postcode and site access.

Can you place a free machine in an Adelaide workplace?

Yes, where the site has around 30 or more daily users and is within our service coverage.

Do you supply cashless readers separately?

Yes, from $550 installed on machines with a compatible MDB controller.

Get a drink machine for your Adelaide site

Send your Adelaide address, headcount and access hours and we will confirm whether free placement applies, or quote a machine to buy.

Machine sizes, specifications and PDF spec sheets

Every machine type we place free or sell outright, with real heights, widths, depths, weights, selection counts, capacity, power draw and temperature ranges. Measure your space against these figures before you order — 4 current models across 1 category. Most floor-standing machines are 1,830 mm high and need a single-phase 10 amp power point within two metres, plus about 100 mm clearance behind for airflow.

Every model has its own listing page with a large photo, full specs and a one-page PDF spec sheet you can hand to your electrician, builder or facilities manager — browse all 4 machine listings.

New machine supply, spare parts and national technician support come through our affiliation with Vending Specialists. We are affiliated with AVS, so every new machine quoted from this page is a current Australian-supplied model with local parts, manuals and technician support behind it.

Cold drink machines

Glass-front and stack drink machines for cans, PET bottles and water. Sized by shelf count and can capacity.

Cold drink machines — dimensions, capacity, power and temperature specifications
ModelBrandH x W x D (mm)WeightSelectionsCapacityPowerTemperatureSpec sheet
Crane MEDIA 2 BevMax (7 Wide / 9 Wide)Best-in-class capacity per footprint, pick-and-place delivery so bottles are not dropped.Crane Merchandising Systems1850 x 1,015 / 1,180 x 822247 / 333 kg35 – 45 drink selectionsVends 5 shelves of 600 ml bottlesSingle phase 10 ampProgrammable 0°C – 23°CPDF
Crane MEDIA BevMax (7 Wide / 9 Wide)Proven high-volume drink machine, full product visibility behind glass.Crane Merchandising Systems1830 x 990 / 1,194 x 813247 / 347 kg35 / 45 selections280 / 360 unitsSingle phase 10 ampRefrigerated glass frontPDF
Vendo G-Drink DR6Executive / MDB, electronic cooling control, strong energy rating for a chilled drink machine.Vendo (SandenVendo)1830 x 950 x 845295 kg6 per shelf, 5 standard shelves / 7 max, 30 – 42 selections336 x 330 ml cans or 240 x 500 ml PET230 V 50 Hz, 800 W max, 252 Wh/h, Energy Class A+2°C to +10°C, climate class N (+16°C to +32°C)PDF
Vendo V721 stack drink machineHighest can capacity on this list. Bottle-to-can conversion needs no shims. LED lighting optional.Vendo (SandenVendo)1830 x 1,003 x 883299 kg10 selections / 10 columns680 cans or 300 PET bottles≤ 3.9 kWh/day (DOE), 8 amp ratingRefrigerated stack, R-134a or CO2 optionPDF